Diploma of Air-conditioning and Refrigeration Engineering

VET NATIONAL CODE: UEE51211

Notice Not Currently Accepting Enrolments

92 Weeks

(76 weeks Tuition + 16 weeks Break)

NSW/QLD Campuses (AIBT)

OffShore Int Student: $24,000 *

OnShore Student Visa Holder: $21,000*

*Total Materials Fee $1,750

This qualification provides competencies to develop systems, select equipment, and commission, maintain and diagnose faults/malfunctions of refrigeration systems and equipment that apply to commercial food storage and preservation and air conditioning and air distribution equipment and special applications. It includes regulatory requirements for purchasing and handling refrigerants.

Pre-Enrolment Information

Prior to enrolment, it is mandatory that students attend a Pre-Enrolment Consultation with one of our approved Education Agents or delegated AIBT staff.

A Pre-Enrolment Consultation session may be provided to a prospective student one or more times to provide the prospective student additional time and/or information to make an informed decision. In addition, the communication channels used for conducting Pre-Enrolment Consultation sessions can be in various forms such as Face-To-Face, Video Conference, telephone call, and email.

Students will be provided with clear and accurate information about their course before enrolment to allow students to make an informed decision.

During this Pre-Enrolment Consultation session, prospective students will be provided with all the relevant course information to help guide them to make a formal decision that will reflect their existing skills and competencies and meet their needs. International students will be provided with a Pre-Enrolment Consultation Checklist and Handout to ensure they understand the support services provided and their obligations as an international student.

International students should ensure that they have read the Pre-Enrolment Consultation Checklist and Handout available on the ‘How to Apply’ page under the ‘Get Started’ tab on this website.

Please Note:

Completion of an AIBT qualification does not guarantee an employment outcome
This qualification will only fulfil the academic requirements, not a licensed trade qualification.
Each state and territory has different requirements in relation to Australian context gap training and electrical authorisation for the licensed occupation of Airconditioning and Refrigeration Mechanic. For more information please visit: The Australian Refrigeration Council Ltd (ARC)
Practice in workplace and during training is subject to regulations directly related to occupational health and safety

Fast Course Guide

National Code:

UEE51211

CRICOS Course Code:

095253D

Nationally Recognised:

Yes (Click Here)

Delivery mode:

AIBT (NSW/QLD)

In Class | Edison Workshop

Training Facilities:

Tech Science Workshop (NSW)
Unit 7, 9A Foundry Road
Seven Hills NSW 2147

Tech Science Workshop (QLD)
Unit 7, 27 Selhurst Street
Coopers Plains Qld 4108

Tech Science Workshop (TAS)
Unit 1, 22 Maxwells Road
Cambridge TAS 7170

Assessment:

A variety of assessment methods form part of this course including written assignments, presentations, portfolios of work, role plays and projects.

Intake Dates:

AIBT – Monthly intakes except June and December

Study Period

In a year, there are two study periods*:

The 1st study period: from January to May (June Break)
The 2nd study period: from July to November (December Break)

*Note: Students may be required to continue their study during the June break and December break. The study classes in June and December can be arranged due to special circumstances (e.g., lack of academic progress or under the intervention strategy plan.)

Awarded by

Brighton Pacific Pty Ltd T/A Australia Institute of Business and Technology (AIBT)

RTO Code 41138 | CRICOS: 03430J

Packaging Rules:

To achieve a Diploma of Air-conditioning and Refrigeration Engineering, a total of 35 units must be completed:
Thirty-Three (33) core units.
Two (2) elective units

A combination of Elective competency standard units to achieve a total weighting of 130 points in accordance with the Elective Competency Standard Units table within https://training.gov.au/Training/Details/UEE51211
Elective units must be relevant to the work outcome, local industry requirements and the qualification level.

Non-Tuition Fees

HANDLING/ ADMINISTRATION FEES (NON-REFUNDABLE)

$200 – (Handling Fee)
$900 – (Administration Fee for Visa Assessment for students with a dependent/family)

PLACEMENT FEE

$500 – for each qualification in Ageing Support and Community Services, unless otherwise stated.

Before commencing placement within Diana School of Community Services, students will be required to obtain mandatory documents at their own expense. Students will be notified via email on when to obtain these documents. More information on these mandatory required documents can be identified on each individual course page on our website: https://aibtglobal.edu.au. Refund policy rules apply to Placement Fees. Please check our Refund Policy for more detailed information: https://aibtglobal.edu.au/support/student-forms/policies

OSHC FEE

International students must have adequate health insurance while in Australia.

It is a condition of your visa that you have Overseas Student Health Cover (OSHC) for the full duration of your student visa. OSHC is insurance to assist international students to meet the costs of medical and hospital care.

You can organise your own OSHC, or we can assist you, as AIBT has an agreement with Bupa, one of Australia’s major health insurance providers. For more information, please visit their website: https://www.bupa.com.au

UNDER 18’S FEE

We are partnered with Australian Homestay Network (AHN) – Australia’s Largest Homestay provider.

The homestay fee includes 3 meals and all amenities and may cost up to $350/week. Please visit https://www.homestaynetwork.org/students/pricing/ for more information about our prices in each campus location.

OTHER FEES

Additional fees will be incurred for re-enrolment, resubmission, credit transfer and certificate re-issuance. For further information, please visit the individual course page on our website: http://go.aibt.global/other-fees

Total Materials Fee – $1,750

Materials fee covers the cost of goods, materials and / or services provided by AIBT to be used by students in the course of training.

The Materials Fees in this qualification include:

Trade tools
Class materials
Printing
Stationery
Safety wear
Uniforms
Excursions

Course Format

Core Subjects

UEENEED104A

Use engineering applications software on personal computers

UEENEEE038B

Participate in development and follow a personal competency development plan

UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE102A

Fabricate, assemble and dismantle utilities industry components

UEENEEE103A

Solve problems in ELV single path circuits

UEENEEE105A

Fix and secure electrotechnology equipment

UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

UEENEEE117A

Implement and monitor energy sector OHS policies and procedures

UEENEEE124A

Compile and produce an energy sector detailed report

UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

UEENEEJ102A

Prepare and connect refrigerant tubing and fittings

UEENEEJ103A

Establish the basic operating conditions of vapour compression systems

UEENEEJ104A

Establish the basic operating conditions of air conditioning systems

UEENEEJ106A

Install refrigerant pipe work, flow controls and accessories

UEENEEJ107A

Install air conditioning and refrigeration systems, major components and associated equipment

UEENEEJ108A

Recover, pressure test, evacuate, charge and leak test refrigerants

UEENEEJ109A

Verify functionality and compliance of refrigeration and air conditioning installations

UEENEEJ110A

Select refrigerant piping, accessories and associated controls

UEENEEJ111A

Diagnose and rectify faults in air conditioning and refrigeration systems and components

UEENEEJ113A

Commission air conditioning and refrigeration systems

UEENEEJ127A

Establish the thermodynamic parameters of refrigeration and air conditioning systems

UEENEEJ129A

Establish heat loads for commercial refrigeration and/or air conditioning applications

UEENEEJ153A

Find and rectify faults in motors and associated controls in refrigeration and air conditioning systems

UEENEEJ164A

Analyse the operation of HVAC air and hydronic systems

UEENEEJ165A

Evaluate thermodynamic and fluid parameters of refrigeration systems

UEENEEJ170A

Diagnose and rectify faults in air conditioning and refrigeration control systems

UEENEEJ192A

Analyse the psychrometric performance of HVAC/R systems

UEENEEJ194A

Solve problems in low voltage refrigeration circuits

UEENEEK145A

Implement and monitor energy sector environmental and sustainable policies and procedures

UEENEEP012A

Disconnect / reconnect composite appliances connected to low voltage installation wiring

UEENEEP017A

Locate and rectify faults in low voltage composite appliances using set procedures

UEENEEP024A

Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply

UEENEEP025A

Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply

Elective Subjects

BSBINM501A

Manage an information or knowledge management system

UEENEEJ132A

Design commercial refrigeration systems and select components

Please note all electives are pre-selected by AIBT.
For more information on the course content, visit www.training.gov.au

Entry Requirements

Entry requirement:

Completion of UEE32211 Cert III in Air-Conditioning and Refrigeration or UEE42711 Cert IV in Air-Conditioning and Refrigeration Servicing or be able to demonstrate equivalent competency.

Academic requirement:

Successful completion of Australian Year 12 or equivalent with satisfactory completion of mathematics and physics.

English requirement:

A minimum of IELTS 5.5 or equivalent is required.

International Students who do not meet the English language requirements for this course may undertake English Language Intensive Course for Overseas Students (ELICOS) according to the English Learning Matrix.

Pre-Requisites

Diploma of Air-conditioning and Refrigeration Servicing (UEE51211)

The following Pre-requisites are required for this qualification.

UEENEEE101A	Apply Occupational Health Safety regulations, codes and practices in the workplace	There are no prerequisite competencies for this unit
UEENEED104A	Use engineering applications software on personal computers	UEENEEE101A Apply Occupational Health Safety regulations, codes and practices in the workplace
UEENEEE038B	Participate in development and follow a personal competency development plan	There are no prerequisite competencies for this unit
UEENEEE105A	Fix and secure electrotechnology equipment	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEE107A	Use drawings, diagrams, schedules, standards, codes and specifications	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEE137A	Document and apply measures to control OHS risks associated with electrotechnology work	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ102A	Prepare and connect refrigerant tubing and fittings	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ103A	Establish the basic operating conditions of vapour compression systems	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ104A	Establish the basic operating conditions of air conditioning systems	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ106A	Install refrigerant pipe work, flow controls and accessories	UEENEEE102A Fabricate, assemble and dismantle utilities industry componentsUEENEEE105A Fix and secure electrotechnology equipmentUEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ107A	Install air conditioning and refrigeration systems, major components and associated equipment	UEENEEJ106A Install refrigerant pipe work, flow controls and accessoriesUEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systemsUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems
UEENEEJ108A	Recover, pressure test, evacuate, charge and leak test refrigerants	UEENEEJ102A Prepare and connect refrigerant tubing and fittingsUEENEEJ103A Establish the basic operating conditions of vapour compression systemsUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ109A	Verify functionality and compliance of refrigeration and air conditioning installations	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplaceUEENEEE102A Fabricate, assemble and dismantle electro componentsUEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, codes and manuals UEENEEE137A Document occupational hazards and risks UEENEEJ102A Prepare and connect refrigeration tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping , accessories UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults in motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose faults in air conditioning & refrigeration UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply
UEENEEJ110A	Select refrigerant piping, accessories and associated controls	UEENEEJ103A Establish the basic operating conditions of vapour compression systemsUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEJ111A	Diagnose and rectify faults in air conditioning and refrigeration systems and components	UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipmentUEENEEJ110A Select refrigerant piping, accessories and associated controlsUEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring
UEENEEJ113A	Commission air conditioning and refrigeration systems	UEENEEJ107A Install air conditioning and refrigeration systemsUEENEEJ110A Select refrigerant piping, accessories & controlsUEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEE101A Apply Occupational Health and Safety regulations UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures
UEENEEJ153A	Find and rectify faults in motors and associated controls in refrigeration and air conditioning systems	UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerantsUEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEJ103A Establish the basic operating conditions of vapour compression systems
UEENEEJ170A	Diagnose and rectify faults in air conditioning and refrigeration control systems	UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE003B Solve problems in extra-low voltage single path circuits
UEENEEJ194A	Solve problems in low voltage refrigeration circuits	UEENEEE103A Solve problems in ELV single path circuits andUEENEEJ103A Establish the basic operating conditions of vapour compression systems and UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace or UEENEEJ195A Establish the basic operating conditions of vapour compression systems – appliances and UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEK142A	Apply environmentally and sustainable procedures in the energy sector	There are no prerequisite competencies for this unit
UEENEEP012A	Disconnect / reconnect composite appliances connected to low voltage installation wiring	There are no prerequisite competencies for this unit
UEENEEP017A	Locate and rectify faults in low voltage composite appliances using set procedures	UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring
UEENEEP024A	Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEP025A	Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply	UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 volt supply
UEENEE103A	Solve problems in ELV single path circuits	UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEE117A	Implement and monitor energy sector OHS policies and procedures	There are no prerequisite competencies for this unit.
UEENEEE124A	Compile and produce an energy sector detailed reports	There are no prerequisite competencies for this unit.
UEENEEJ127A	Establish the thermodynamic parameters of refrigeration and air conditioning systems	UEENEEJ192A Analyse the psychrometric performance of HVAC/R systemsUEENEEJ193A Analyse the thermodynamic performance of HVAC/R systems OR UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping, accessories and associated controls UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply.
UEENEEJ129A	Establish heat loads for commercial refrigeration and/or air conditioning applications	UEENEEJ127A Establish the thermodynamic parameters of refrigeration and air conditioning systems UEENEEJ192A Analyse the psychrometric performance of HVAC/R systems and UEENEEJ193A Analyse the thermodynamic performance of HVAC/R systems or UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping, accessories and associated controls UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply
UEENEEJ164A	Analyse the operation of HVAC air and hydronic systems	UEENEEJ192A Analyse the psychrometric performance of HVAC/R systemsUEENEEJ193A Analyse the thermodynamic performance of HVAC/R systems or UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping, accessories and associated controls UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply
UEENEEJ165A	Evaluate thermodynamic and fluid parameters of refrigeration systems	UEENEEJ127A Establish the thermodynamic parameters of refrigeration and air conditioning systemsUEENEEJ164A Analyse the operation of HVAC air and hydronic systems UEENEEJ192A Analyse the psychrometric performance of HVAC/R systems and UEENEEJ193A 0r Analyse the thermodynamic performance of HVAC/R systems UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping, accessories and associated controls UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply
UEENEEJ192A	Analyse the psychrometric performance of HVAC/R systems	UEENEEJ193A Analyse the thermodynamic performance of HVAC/R systems or UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE103A Solve problems in ELV single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping, accessories and associated controls UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply
UEENEEK145A	Implement and monitor energy sector environmental and sustainable policies and procedures	There are no prerequisite competencies for this unit
BSBINM501A	Manage an information or knowledge management system	There are no prerequisite competencies for this unit
UEENEEJ132A	Design commercial refrigeration systems and select components	UEENEEJ129A Establish heat loads for commercial refrigeration and/or air conditioning applicationsUEENEEJ165A Evaluate thermodynamic and fluid parameters of refrigeration systems UEENEEJ127A Establish the thermodynamic parameters of refrigeration and air conditioning systems UEENEEJ164A Analyse the operation of HVAC air and hydronic systems UEENEEJ192A Analyse the psychrometric performance of HVAC/R systems and UEENEEJ193A Analyse the thermodynamic performance of HVAC/R systems or UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, assemble and dismantle utilities industry components UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE105A Fix and secure electrotechnology equipment UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work UEENEEJ102A Prepare and connect refrigerant tubing and fittings UEENEEJ103A Establish the basic operating conditions of vapour compression systems UEENEEJ104A Establish the basic operating conditions of air conditioning systems UEENEEJ106A Install refrigerant pipe work, flow controls and accessories UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants UEENEEJ110A Select refrigerant piping, accessories and associated controls UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components UEENEEJ113A Commission air conditioning and refrigeration systems UEENEEJ153A Find and rectify faults motors and associated controls in refrigeration and air conditioning systems UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems UEENEEJ194A Solve problems in low voltage refrigeration circuits UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply

Licensing/Regulatory Information

OHS:
Practice in workplace and during training is subject to regulations directly related to occupational health and safety.

Ozone Protection and Synthetic Greenhouse Legislation:
The Ozone Protection and Synthetic Greenhouse Gas Legislation Amendment Bill 2003 apply to this qualification. Prior to planning the delivery of any training and/or assessment activities all legislative and regulatory requirements shall be identified and included.
https://www.legislation.gov.au/Details/C2004B01432

Electrical Authorisation Licenced Occupation of Air-conditioning and Refrigeration Mechanic:
Each state and territory has different requirements in relation to Australian context gap training and electrical authorisation for the licenced occupation of Airconditioning and Refrigeration Mechanic.

New South Wales

To apply for a refrigerant handling licence and the Provisional Tradesperson Certificate, OTSR holders wishing to work in New South Wales (NSW) must contact:

the Australian Refrigeration Council (ARC),who issue the Trainee Licence (for handling of refrigerant in classroom and workplace), and
New South Wales Fair Trading who is the regulator responsible for issuing the Provisional Tradesperson Certificate.

IMPORTANT: Both licences are required to work in NSW as an Airconditioning and Refrigeration Mechanic (under supervision).

Holders of a Trainee Licence and a Provisional Tradesperson Certificate must:

enrol in and complete Australian context gap training, and
work under the supervision of a current holder of an Airconditioning and Refrigeration Licence or Certificate.

On successful completion of Australian context gap training and supervised employment, applicants are eligible to apply for a Diploma of Air-conditioning and Refrigeration Engineering (UEE51211).

On receipt of the Diploma of Air-conditioning and Refrigeration Engineering (UEE51211), an applicant may apply for a full Refrigerant Handling Licence – Qualified Persons (2 years) with ARC and an Airconditioning and Refrigeration Licence or Certificate with New South Wales Fair Trading.

For specific information about airconditioning and refrigeration licences in NSW please contact the following:

Australian Refrigeration Council

Telephone	1300 884 483
Email	enquire@arctick.org
Address	Locked Bag 3033 BOX HILL VIC 3128
Website	https://www.arctick.org

New South Wales Fair Trading

Telephone	13 32 20
Email	HBLicensing@finance.nsw.gov.au
Address	NSW Fair Trading PO Box 972 PARRAMATTA NSW 2124
Website	NSW Fair Trading

Queensland

Refrigerant handling licence

To apply for a refrigerant handling licence, OTSR holders wishing to work in Queensland (QLD) must contact the:

Australian Refrigeration Council (ARC), who issue the Trainee Licence(for handling of refrigerant in classroom and workplace)

Holders of a Trainee Licence must:

enrol in and complete Australian context gap training, and
work under the supervision of a holder of a current and full licence that is related to the refrigeration work that the trainee licence holder is being trained in, for a period up to twelve (12) months.

On successful completion of Australian context gap training and supervised employment, applicants are eligible to apply for a Diploma of Air-conditioning and Refrigeration Engineering (UEE51211).

On receipt of the Diploma of Air-conditioning and Refrigeration Engineering (UEE51211), an applicant may apply for a full Refrigerant Handling Licence – Qualified Persons (2 years).

For more information about airconditioning and refrigeration licences in QLD, please contact the Australian Refrigeration Council.

Telephone	1300 884 483
Email	enquire@arctick.org
Address	Locked Bag 3033 BOX HILL VIC 3128
Website	https://www.arctick.org

Electrical work licence

A person who holds an OTSR as an airconditioning and refrigeration mechanic must obtain the Diploma of Air-conditioning and Refrigeration Engineering (UEE51211) before being eligible for a restricted electrical work licence in Queensland. Whilst holding the OTSR and the Trainee Licence, you must have a licensed person carry out the disconnecting, reconnecting and fault finding of any electrical equipment you are required to work on.

On receipt of the Diploma of Air-conditioning and Refrigeration Engineering (UEE51211), you may apply for a restricted electrical work licence. In most cases applicants will be issued with an electrical work training permit and will need to undertake additional on and off the job training to obtain the licence. For more information please contact the Electrical Safety Office on 1300 632 993.

Refrigeration and Airconditioning work licence

A holder of a Diploma of Air-conditioning and Refrigeration Engineering (UEE51211) and a Refrigerant Handling Licence issued by the ARC is required to apply to the Queensland Building and Construction Commission (QBCC) for licensing for refrigeration and airconditioning work. For more information please visit the QBCC website www.qbcc.qld.gov.au or contact QBCC on 139 333.

Unit Code	Unit Title	Licensing/Regulatory Information
UEENEEED104A	Use engineering applications software on personal computers	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety.
UEENEEE038B	Participate in development and follow a personal competency development plan	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety.
UEENEEE101A	Apply Occupational Health and Safety regulations, codes and practices in the workplace	During Training: Competency development activities are subject to regulations directly related to licencing, occupational health and safety. In the workplace: The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Other conditions may apply under State and Territory legislative and regulatory requirements.
UEENEEE102A	Fabricate, assemble and dismantle utilities industry components	During Training: Competency development activities are subject to regulations directly related to licencing, occupational health and safety. In the workplace: The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Other conditions may apply under State and Territory legislative and regulatory requirements.
UEENEEE103A	Solve problems in ELV single path circuits	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, they are subject to regulations directly related to occupational health and safety.
UEENEEE105A	Fix and secure electrotechnology equipment	During Training: Competency development activities are subject to regulations directly related to licencing, occupational health and safety. In the workplace: The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Other conditions may apply under State and Territory legislative and regulatory requirements.
UEENEEE107A	Use drawings, diagrams, schedules, standards, codes and specifications	During Training: Competency development activities are subject to regulations directly related to licencing, occupational health and safety. In the workplace: The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Other conditions may apply under State and Territory legislative and regulatory requirements.
UEENEEE117A	Implement and monitor energy sector OHS policies and procedures	The competency described in this unit does not directly require a license to practice but is subject to regulations for occupational health and safety.
UEENEEE124A	Compile and produce an energy sector detailed report	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety.
UEENEEE137A	Document and apply measures to control OHS risks associated with electrotechnology work	During Training: Competency development activities are subject to regulations directly related to licencing, occupational health and safety. In the workplace: The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Other conditions may apply under State and Territory legislative and regulatory requirements.
UEENEEJ102A	Prepare and connect refrigerant tubing and fittings	The skills and knowledge described in this unit may, in some jurisdictions, require a license to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ103A	Establish the basic operating conditions of vapour compression systems	The skills and knowledge described in this unit may, in some jurisdictions, require a license to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ104A	Establish the basic operating conditions of air conditioning systems	The skills and knowledge described in this unit may, in some jurisdictions, require a license to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ106A	Install refrigerant pipe work, flow controls and accessories	The skills and knowledge described in this unit may, in some jurisdictions, require a license to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ107A	Install air conditioning and refrigeration systems, major components and associated equipment	The skills and knowledge described in this unit may, in some jurisdictions, require a license to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ108A	Recover, pressure test, evacuate, charge and leak test refrigerants	The skills and knowledge described in this unit may, in some States/Territories, require a license to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ109A	Verify functionality and compliance of refrigeration and air conditioning installations	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. In some States/Territories a licence is required to practise this unit in the workplace subject to regulations for undertaking refrigeration and air conditioning work and in particular working with refrigerants. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety.
UEENEEJ110A	Select refrigerant piping, accessories and associated controls	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ111A	Diagnose and rectify faults in air conditioning and refrigeration systems and components	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. In some States/Territories a licence is required to practise this unit in the workplace subject to regulations for undertaking refrigeration and air conditioning work and in particular working with refrigerants. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ113A	Commission air conditioning and refrigeration systems	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ127A	Establish the thermodynamic parameters of refrigeration and air conditioning systems	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. In some States/Territories a licence is required to practise this unit in the workplace subject to regulations for undertaking refrigeration and air conditioning work and in particular working with refrigerants. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures. .
UEENEEJ129A	Establish heat loads for commercial refrigeration and/or air conditioning applications	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. In some States/Territories a licence is required to practise this unit in the workplace subject to regulations for undertaking refrigeration and air conditioning work and in particular working with refrigerants. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ32A	Design commercial refrigeration systems and select components	The skills and knowledge described in this unit do not require a license to practice in the work place. However practice in this unit is subject to regulations directly related to occupational health and safety.
UEENEEJ153A	Find and rectify faults in motors and associated controls in refrigeration and air conditioning systems	The skills and knowledge described in this unit require a license to practice in the workplace where appliances are connected to fixed wiring at voltage above 50 V a.c. or 120 V d.c. In some States/Territories a licence is required to practise this unit in the workplace subject to regulations for servicing refrigeration or air conditioning appliance in particular when working with refrigerants. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical devices, site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ164A	Analyse the operation of HVAC air and hydronic systems	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety, codes of work practice and standard work procedures related to the operation of automated machinery.
UEENEEJ165A	Evaluate thermodynamic and fluid parameters of refrigeration systems	The skills and knowledge described in this unit may require a license to practice in the workplace subject to regulations for undertaking of refrigeration or air conditioning work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical devices, site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures.
UEENEEJ170A	Diagnose and rectify faults in air conditioning and refrigeration control systems	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. In some States/Territories a licence is required to practise this unit in the workplace subject to regulations for undertaking refrigeration and air conditioning work and in particular working with refrigerants. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: 1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. 2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures
UEENEEJ192A	Analyse the psychrometric performance of HVAC/R systems	The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety, codes of work practice and standard work procedures related to the operation of automated machinery.
UEENEEJ194A	Solve problems in low voltage refrigeration circuits	The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V a.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety.
UEENEEK145A	Implement and monitor energy sector environmental and sustainable policies and procedures	The skills and knowledge described in this unit may require a licence/registration to practice in the work place subject to regulations for undertaking of electrical work. Practice in workplace and during training is also subject to regulations directly related to Occupational Health and Safety. Commonwealth, State/Territory or Local Government legislation and regulations may exist that limits the age of operating certain equipment.
UEENEEP012A	Disconnect / reconnect composite appliances connected to low voltage installation wiring	The skills and knowledge described in this unit requires a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety. Note: Candidates are to meet regulator eligibility requirements by providing formal confirmation from the relevant state/territory regulator for the respective work class and scope of work prior to developing and being conferred competent.
UEENEEP017A	Locate and rectify faults in low voltage composite appliances using set procedures	The skills and knowledge described in this unit may require a license to practice in the workplace subject to regulations for undertaking of electrical work. Practice in workplace and during training is also subject to regulations directly related to occupational health and safety. Note: Candidates are to meet regulator eligibility requirements by providing formal confirmation from the relevant state/territory regulator for the respective work class and scope of work prior to developing and being conferred competent.
UEENEEP024A	Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply	The skills and knowledge described in this unit may require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety. Note: Candidates are to meet regulator eligibility requirements by providing formal confirmation from the relevant state/territory regulator for the respective work class and scope of work prior to developing and being conferred competent.
UEENEEP025A	Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply	The skills and knowledge described in this unit may require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety. Note: Candidates are to meet regulator eligibility requirements by providing formal confirmation from the relevant state/territory regulator for the respective work class and scope of work prior to developing and being conferred competent.

Simulated Training

Simulated Work Environment

AIBT provides 460 hours per year of simulated training within our Engineering workshops. Simulated training is not equivalent to vocational placement.

Qualification Issued

Completing all the units of competency within this qualification will lead to the issuance of a Diploma of Air-conditioning and Refrigeration Engineering (UEE51211) and a transcript of academic record. Students that successfully complete individual units of competency, but not the whole qualification, will be eligible to receive a Statement of Attainment detailing the completed units.

Related Occupations

Refrigeration
Air-conditioning Technical Officer

* Completion of an AIBT qualification does not guarantee an employment outcome.

This qualification will only fulfil the academic requirements, not a licensed trade qualification. For more information please visit: The Australian Refrigeration Council Ltd (ARC).

take the next step

(+61) 1300 128 199

Diploma of Air-conditioning and Refrigeration Engineering